SEARCH SCALEAUTOMAG.COM

Enter keywords or a search phrase below:

Beetle Bailey Jeep WIP

569 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December, 2005
  • From: Upstate New York
Beetle Bailey Jeep WIP
Posted by spencer1984 on Wednesday, January 30, 2019 9:26 PM

Growing up with the "classic" comics, Beetle Bailey was a staple as far back as I can remember. I wanted to make a tribute to this strip in scale, but with something that more closely reflected Mort Walker's art than a box stock Jeep. So I'm doing a full scratch build and aiming for somewhere between the full detail of Hasegawa's Willys MB (which is serving as a guide for me) and the simplicity of the comic art.

The frame rails are .080" styrene with various other sizes for crossmembers. The bumper is C channel, and the springs are layered .010" stock.

I'm building the body from the inside out, mostly using .040" sheet styrene at this point. I've got some filler on the seams, and once that's set I'll sand and start adding the outer body panels.

The grille is something I drew and had 3D printed at Shapeways, and the hood is a section of .375" tube sliced in half and grafted to a flat piece of .040" sheet. Since this is going to be a curbside, I added some extra bracing under the hood to prevent cracks in the filler.

As always, any comments/criticisms/suggestions are welcome!

  • Member since
    December, 2005
  • From: Upstate New York
Posted by spencer1984 on Friday, February 01, 2019 11:30 PM

A little more progress tonight, got the tub fully enclosed. The door cutouts are pretty much always drawn as simple loops, so I copied that look here. Next up will be the front fenders and firewall...

  • Member since
    January, 2015
Posted by mustang1989 on Saturday, February 02, 2019 5:24 AM

Very cool subject Bill. Looking forward to more on this.

Being really stupid is the new smart!! 

    Joe

  • Member since
    December, 2003
  • From: Nova Scotia
Posted by Bainford on Monday, February 04, 2019 7:55 AM

Interesting project, and the work so far is looking great.

Perfection is achieved not when there is nothing more to add, but when there is nothing left to take away.
       - Antoine de Saint-Exepury

Trevor

  • Member since
    January, 2008
  • From: Plano (Dallas), Texas
Posted by mmthrax on Monday, February 04, 2019 10:36 AM

Very impressed with the scratchbuilding.  This is going to be great!! Dinner

Just keep picking away at it...

  • Member since
    December, 2005
  • From: Upstate New York
Posted by spencer1984 on Tuesday, February 05, 2019 2:05 PM

Thanks, guys! Got a bit more done, with axles and the front of the body starting to take shape:

  • Member since
    January, 2005
  • From: Canberra, Australia
Posted by aussiemuscle308 on Thursday, February 07, 2019 3:33 AM
Fabulous scratchbuilding. i like this
  • Member since
    December, 2005
  • From: Upstate New York
Posted by spencer1984 on Friday, February 08, 2019 5:27 AM
Thanks!
  • Member since
    December, 2005
  • From: Upstate New York
Posted by spencer1984 on Monday, February 11, 2019 8:35 AM

The chassis is now finished except for the front driveshaft. I'll install that once I get the engine in:

  • Member since
    January, 2008
  • From: Plano (Dallas), Texas
Posted by mmthrax on Monday, February 11, 2019 12:16 PM

Great stuff this is.  Very well thought out and executed.

Carry on sir...

 

Just keep picking away at it...

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS

FREE MONTHLY NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our privacy policy