SEARCH SCALEAUTOMAG.COM

Enter keywords or a search phrase below:

1999 EM1 Honda Civic WIP

4705 views
19 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June, 2015
1999 EM1 Honda Civic WIP
Posted by Fallenz on Friday, September 04, 2015 8:38 PM

What is up everyone I'm back with a new WIP, it's a 99 EM1 by Revell which is part of the Fast and the Furious series.

What I got done so far was a half finished the engine. Right now I'm stuck because I have to figure out a way to make . If anyone knows how please let me know. I had also got some individual throttle bodies (itb's) from the Revell Datsun 510.

Thats it for now, I hope someone can let be know how to make these cam gears so I can get this engine done. And since school is starting on Wednesday for me this is going to be a slow build because of all the work I'm going to get. Might do an update tomorrow but I'll see how everything goes. 

  • Member since
    June, 2015
Posted by Fallenz on Sunday, September 27, 2015 10:11 AM

So it's been almost a month now since I started this build, I never really had time to do anything until this weekend. Got a little bit done today.

The engine is slowly starting to look like the Spoon B18.

Finally someone came through and showed me how to make these cams!

My little brother and I did a rim swap, I gave him my Type R's from my EP3 and he gave me his Mugen MF10, their kinda beat up but I'll make them look good.

  • Member since
    June, 2015
Posted by Fallenz on Sunday, September 27, 2015 10:34 AM

Alright, I the B18 is almost done, put on the carbon kevlar spark plug cover and painted the distributor, just need to plug in the distributors cables and finish the ITB's.

Since I have ITB's, I don't need the air box so I cutted it out.

Spoon B18 plus Mugen MF10's

A little top view shot...

I just love the way the MF10's look on the EM1!!

Well that's it for now, when will I do another update, who knows! Hopefully I don't have a lot of homework next week but we'll see what happens.

  • Member since
    January, 2005
  • From: Bombala, Australia
Posted by aussiemuscle308 on Thursday, October 01, 2015 8:04 PM
nice work on the engine detailing. looks like you're having fun
  • Member since
    January, 2015
  • From: arlington, tx.
Posted by rusty32rod on Friday, October 02, 2015 3:13 PM
Looking good. nice job on the cam gears.
  • Member since
    June, 2015
Posted by Fallenz on Sunday, December 06, 2015 9:33 PM

Hey everyone it's been awhile since I've touched this EM1. School has been work heavy and the ball season started, I'm lucky I had time this weekend to work.

I started to work on the oem bumper first,

I decided to open up the bumper to give it a more race car look,

I did a little mock-up with the splitter,

And how it looks on the Civic.

Well that's all, like I said its gunna be a slow build. I probably won't be able to paint it until the spring when it is warm outside. I'll be off in 2 weeks so I'll have more done then.

  • Member since
    June, 2015
Posted by Fallenz on Sunday, December 06, 2015 9:35 PM

Thanks, glad you like it aussiemuscle308 and rusty32rod

  • Member since
    July, 2007
  • From: Bristol,TN
Posted by olskoolrodder on Wednesday, December 09, 2015 9:22 PM

Looking good!

On the bench: Dust and a mess of non-model junk

The Model Garage (my blog): https://modelcargarageblog.wordpress.com/

FB: https://www.facebook.com/Olskoolroddersmodels/?notif_t=page_fan

 

  • Member since
    June, 2015
Posted by Fallenz on Saturday, January 02, 2016 7:52 PM

So I actually got a lot of work done over the past two weeks but this will be a little updated until I take better photos.

I finally found something to make the spark plug wires

Almost finished shaving both sides, just gotta fill a little bit more

Spoon Sport B18C sitting pretty

Going to make some custom headers like Big Mike's Prelude

Got the splitter cut and glued I said it was going to be short but there is much more to come. BTW I got some paint laid down and finished the interior.

  • Member since
    June, 2015
Posted by Fallenz on Saturday, January 02, 2016 7:56 PM

thanks olskoolrodder

  • Member since
    July, 2007
  • From: Bristol,TN
Posted by olskoolrodder on Saturday, January 09, 2016 9:51 PM

You're welcome Yes

On the bench: Dust and a mess of non-model junk

The Model Garage (my blog): https://modelcargarageblog.wordpress.com/

FB: https://www.facebook.com/Olskoolroddersmodels/?notif_t=page_fan

 

  • Member since
    June, 2015
Posted by Fallenz on Sunday, January 24, 2016 8:40 PM

What's up everyone I'm back with the finished interior and semi shaved bay. 

   And the Integra Type R seats I tried to get the S2000 cluster from my brother but he said he used both stickers Love the bright red ITR's

  • Member since
    June, 2015
Posted by Fallenz on Saturday, February 13, 2016 12:42 PM

Finally got it painted but I don't like the way it came out Crying The engine is completly finished Found some Spoon Sport Side Mirrors  I tried to make the Tein Coilovers but i couldn't mix the right green but this still looks good Barely started the lower control arms The front wheels are a little too wide, so I'm gunna try to "roll the fenders" Other than how the colour came out, it's going good for now.

  • Member since
    June, 2015
Posted by Fallenz on Wednesday, June 01, 2016 3:00 PM

So it's been awhile since I touched the Civic. But I got some things done.

Alright, first things first I gotta deal with the wheel poke up front.

  (Notice the plastic on the fenders)

A little more work and now it looks like this.

And I know y'all were peeping the hood

Well I'm making the J's Racing hood

So this is how its gunna stay until school's out or maybe not

  • Member since
    June, 2011
Posted by baggedfiddy3belair on Tuesday, August 30, 2016 1:40 PM

Looks good in like it, but u have to flare the rear quarter panels too. Just doing the front and not the rear make it look half-assed so to speak. Just my opinion. Good job though dude!

  • Member since
    June, 2015
Posted by Fallenz on Thursday, September 22, 2016 10:10 PM
no i understand what you mean but if i widened out the back as well it would look weird too because its just flares the body line wouldn't follow it it throw everything off thats why i only did the front
  • Member since
    June, 2015
Posted by Fallenz on Thursday, September 22, 2016 10:14 PM

So now it is complete!!

  • Member since
    June, 2015
Posted by topman on Friday, September 23, 2016 8:23 AM

Pretty awesome work on this; this is the most custom I've seen this kit done (I have it in my stash, thinking about doing it showroom stock, though). Congrats Yes

  • Member since
    January, 2005
  • From: Bombala, Australia
Posted by aussiemuscle308 on Tuesday, September 27, 2016 2:39 AM
Nice Job, Fallenz. it turned out nice.
  • Member since
    August, 2016
Posted by mini man on Wednesday, September 28, 2016 1:32 PM

Nice work on the body mods.Yes

Will build most anything,love American cars muscle etc.Britishvehicles are a buzz too,trucks are great - want to do a jet truck,building parts up...

Nigel.

 

U.K.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

FREE MONTHLY NEWSLETTER
SUBSCRIBER-ONLY CONTENT