SEARCH SCALEAUTOMAG.COM

Enter keywords or a search phrase below:

AMT 53 Corvette 2/12 update

837 views
20 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June, 2013
  • From: Sugarloaf, PA
AMT 53 Corvette 2/12 update
Posted by Johnt on Monday, January 08, 2018 3:55 PM

I started this kit until the temp gets above -15 degrees, and I can repaint the cab of my 29 Ford P/U. I painted the bodies of a few kits so I could work on them over the winter, this is one of them. I'm almost to the point that I need to spray some of the parts on this one. but there's a warm up coming over the next few days.

I was going to go with a V-8 but I chose to go box stock staying with the Blue Flame six,

 

20180107 11443020180107 114420

  • Member since
    February, 2008
Posted by justmike on Monday, January 08, 2018 4:16 PM

Don'tcha just hate it when the weather dictates your painting schedule? Especially if its on a day off from work!  I am doing a bunch of hand painted fiddly bits waiting for a dry day right now.

Feelings are like scents: The more they are analyzed, the worse they smell.
  • Member since
    May, 2017
  • From: Douglas AZ>
Posted by littletimmy on Monday, January 08, 2018 5:08 PM

I built that kit waaaaaayyyyy back in 1980.

I also used a 6 cylinder engine ( witha few "non stock" addition's ) And ran the exaust out the  upper part of the driver's side front fender.  The exaust looked like this   :::

It looked cool..... but in real life the driver would have suffered burn's to the face every time he "floored " it !

 

Dont worry about the thumb print.... paint it rust and call it battle damage

In the stash ... soon to be on the bench.

 

 

 

  • Member since
    June, 2013
  • From: Sugarloaf, PA
Posted by Johnt on Tuesday, January 09, 2018 7:54 AM

justmike

Don'tcha just hate it when the weather dictates your painting schedule? Especially if its on a day off from work!  I am doing a bunch of hand painted fiddly bits waiting for a dry day right now.

 

It;s a pain. It looks like the after of today and tomorrow will be good enough to spray as long as the wind stays low.

  • Member since
    February, 2008
Posted by justmike on Tuesday, January 09, 2018 7:30 PM

I have to sneak down to our community storage locker when I spray paint. Fortunately its vented to the outside but its not the best for lighting or heat. Still, at least I can do some spraying in the winter.  Lawsy, I miss my man cave!

 

Feelings are like scents: The more they are analyzed, the worse they smell.
  • Member since
    February, 2014
Posted by Scale modeller on Wednesday, January 10, 2018 5:07 PM

I solved my winter painting blues by building a paint booth. I just used some scrap plywood I had, a $20 bathroom fan and exhaust hose. No more odour in the house, and I can paint in the winter now. 

  • Member since
    June, 2013
  • From: Sugarloaf, PA
Posted by Johnt on Thursday, January 11, 2018 8:00 AM

It's interesting to see how you all were able to solve the winter painting problem.

I got to paint what I needed to the last two days. Heres a few pictures.

20180110 134010

20180110 142453

 

20180110 172921

  • Member since
    June, 2013
  • From: Sugarloaf, PA
Posted by Johnt on Saturday, January 20, 2018 11:35 AM

I got some more done on it

20180118 180521

20180117 181856

20180118 150327

  • Member since
    June, 2013
  • From: Sugarloaf, PA
Posted by Johnt on Saturday, January 20, 2018 11:37 AM

More pictures.

20180119 105925

20180119 101613

  • Member since
    February, 2008
Posted by justmike on Sunday, January 21, 2018 12:01 AM

Nice work on the dash bazels. 

Feelings are like scents: The more they are analyzed, the worse they smell.
  • Member since
    May, 2017
Posted by Tom Louis on Sunday, January 21, 2018 10:14 AM

It seems to coming along quite nicely!

Thunderbass Shufflemaster

  • Member since
    June, 2013
  • From: Sugarloaf, PA
Posted by Johnt on Monday, January 22, 2018 9:53 AM
Thanks. I've been having a tough time getting the body to sit right. I think I've got that worked out now, by trimming the bottom of the firewall to lower the nose.
  • Member since
    June, 2013
  • From: Sugarloaf, PA
Posted by Johnt on Thursday, January 25, 2018 4:16 PM

I got more done, and now I need a fairly warm day to respary the body. I found a few spots that needed a little more sanding. I wasn't a big fan of the C-1's but it's growing on me. Maybe I'll see if I can find a couple more and do a gasser and an old road race versions.

20180122 180547

Here's some new pictures,

20180122 180445

  • Member since
    June, 2013
  • From: Sugarloaf, PA
Posted by Johnt on Wednesday, January 31, 2018 1:01 PM

The engine and engine compartment is done. I got to respray the body and now I'm compounding it.

 

20180129 162314

  • Member since
    June, 2013
  • From: Sugarloaf, PA
Posted by Johnt on Friday, February 02, 2018 2:16 PM

I compounded the paint, and started on the chrome trim. I'm taking a break from BMFing now and that will be done tonight. I also had to fix a couple of things with the interior.

20180201 145128-1

 

20180201 183248

  • Member since
    January, 2008
  • From: Plano (Dallas), Texas
Posted by mmthrax on Friday, February 02, 2018 3:57 PM

WOW.  That is the first kit I ever built.  Back in 80 like littletimmy.

Yours is looking great.  Nice clean work.  Watching this space....

Just keep picking away at it...

  • Member since
    June, 2013
  • From: Sugarloaf, PA
Posted by Johnt on Saturday, February 03, 2018 9:38 AM

mmthrax

WOW.  That is the first kit I ever built.  Back in 80 like littletimmy.

Yours is looking great.  Nice clean work.  Watching this space....

 

Thanks. I also did this kit years ago, when I was a big Corvette fan. But I was never wild about the C-1.  I picked it up at Ollies for eight buck because it was cheap, and I now like it more then back in the day. I wish I grabbed a couple more now to make different versions of the kit.

  • Member since
    June, 2013
  • From: Sugarloaf, PA
Posted by Johnt on Tuesday, February 06, 2018 4:13 PM

It's getting there. I tried to get the front lower, but no luck. I took the front apart and cut the springs and kingpins down, which helped. I had the hood fitting pretty nice, but I guess the paint changed the fit, so I've got a little work to do.

 

20180204 183428

20180204 183618-1

 

20180204 183717-1

  • Member since
    June, 2013
  • From: Sugarloaf, PA
Posted by Johnt on Tuesday, February 13, 2018 1:00 PM

The nose is almost done and I got the windshield in the frame. I had a tough time with the glass until I remembered the thin double stick tape I got from Fastcap. That made it easy.

 

20180212 140721

 

20180211 172718

  • Member since
    December, 2005
  • From: southeast Texas
Posted by texwardfan on Wednesday, February 21, 2018 5:25 PM

Wow, Beautiful build.

  • Member since
    January, 2008
  • From: Plano (Dallas), Texas
Posted by mmthrax on Wednesday, February 21, 2018 7:27 PM

Looking really good John.  Yes

Just keep picking away at it...

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

FREE MONTHLY NEWSLETTER
SUBSCRIBER-ONLY CONTENT