SEARCH SCALEAUTOMAG.COM

Enter keywords or a search phrase below:

1967 Shelby Mustang GT 350 WIP - Finished, Outdoor Pics

1822 views
21 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March, 2006
  • From: Spring, Tx
1967 Shelby Mustang GT 350 WIP - Finished, Outdoor Pics
Posted by modelcarjr on Friday, June 29, 2018 3:52 PM

My son bought this one for me for my birthday. I don't have it in my closet but I know I have seen it on the shelves and wondered why I didn't have it.  I looked at the box and realized it was molded in black. I don't know if any are molded in white but once I saw that it was molded in black I realized that it might have affected my decision when perusing the shelves at Michaels or Hobby Lobby.

Nevertheless, I have started this one while finishing up the Dodge Viper for my grandson. I glued on the separate trunk lid, faux vents, headlight and taillight panels and cleaned up the mold lines and flash. I cleaned up and re-scribed the headlight and taillight panel lines to make them look like panel lines instead of glue joints. I'm pretty sure I can install the chassis with everything on the body glued together. I'll just have to install the headlights and taillights before putting the body on the chassis, I think. If not, I have to find a workaround.

I am thinking about substituting Testors Nassau Blue Metallic for Brittany Blue. Not sure about the interior. I'll have to look at a few photos. Thanks for looking!

If you cannot have a good time, what kinda time can you have? JR

Next on the bench:  Another 1970 Hemi 'Cuda, 1958 Chevy Impala, 1987 Buick GNX, 1950 Chevy Pick-up, Indy Reynard, 1965 Corvette, probably not in this order.

  • Member since
    November, 2003
  • From: East Bethel, Mn
Posted by midnightprowler on Friday, June 29, 2018 4:34 PM

I mixed up paint at work to match Brittany Blue. If you haven't primed that, or it is primed with Duplicolor primer, I can paint it for you. Pm me if interested.

1 Corinthians 15:51-54
1 Thessalonians 4:13-18

Ask me about Speedway Decals

  • Member since
    January, 2015
Posted by mustang1989 on Saturday, June 30, 2018 6:58 AM

Looking forward to more on this one JR.Yes

Being really stupid is the new smart!! 

    Joe

  • Member since
    August, 2005
  • From: Nashua, New Hampshire
Posted by mrmike on Saturday, June 30, 2018 7:27 AM

I'm sure you can make this Shelby look great in your usual fashion!  Looking forward to your build.  I built this model many years ago and I had issues with the decals being a little too transparent with the dark blue paint showing through.  I also built the '67 Mustang GT which is the same kit minus the Shelby bits.

"That's Spenser with an 'S' like the poet." Robert Urich Spenser For Hire 1985

On my bench-LAPD 1978 Plymouth Fury; 1956 Ford Fairlane Victoria

Classic Plastic Model Club

  • Member since
    November, 2003
  • From: West TN
Posted by v6mike on Saturday, June 30, 2018 3:41 PM

Looking grest. I have that kit also somewhere in my stash. I hope to get to it at some point in my life.

On the bench: Anything I haven't finished!
  • Member since
    March, 2006
  • From: Spring, Tx
Posted by modelcarjr on Sunday, July 01, 2018 7:22 AM

Thanks, Prowler, Joe, Mike and Mike! I appreciate your comments! Prowler, I appreciate your offer but I like to do everything on my builds in case I enter them in contests. But I appreciate your offer!  Cool

If you cannot have a good time, what kinda time can you have? JR

Next on the bench:  Another 1970 Hemi 'Cuda, 1958 Chevy Impala, 1987 Buick GNX, 1950 Chevy Pick-up, Indy Reynard, 1965 Corvette, probably not in this order.

  • Member since
    March, 2006
  • From: Spring, Tx
Posted by modelcarjr on Thursday, July 05, 2018 10:16 AM

Rained all day yesterday and it has been hot and humid prior to that so I haven't done much painting yet. I did manage to assemble the engine, including plug wiring and a gas line. Thanks for looking! Cool

If you cannot have a good time, what kinda time can you have? JR

Next on the bench:  Another 1970 Hemi 'Cuda, 1958 Chevy Impala, 1987 Buick GNX, 1950 Chevy Pick-up, Indy Reynard, 1965 Corvette, probably not in this order.

  • Member since
    March, 2006
  • From: Spring, Tx
Posted by modelcarjr on Tuesday, July 10, 2018 4:49 PM

Making slow progress. No rain today so maybe I'll be able to paint the body tomorrow. In the meantime, I have foiled the doors and dash, assembled the chassis and wheels. No decals for the gauges so I just painted a black face and picked in some red indicators. Thanks for looking! Cool

If you cannot have a good time, what kinda time can you have? JR

Next on the bench:  Another 1970 Hemi 'Cuda, 1958 Chevy Impala, 1987 Buick GNX, 1950 Chevy Pick-up, Indy Reynard, 1965 Corvette, probably not in this order.

  • Member since
    March, 2006
  • From: Spring, Tx
Posted by modelcarjr on Wednesday, July 11, 2018 7:36 AM

This is a test.

If you cannot have a good time, what kinda time can you have? JR

Next on the bench:  Another 1970 Hemi 'Cuda, 1958 Chevy Impala, 1987 Buick GNX, 1950 Chevy Pick-up, Indy Reynard, 1965 Corvette, probably not in this order.

  • Member since
    March, 2006
  • From: Spring, Tx
Posted by modelcarjr on Wednesday, July 11, 2018 10:59 AM

I painted the body today. Two coats of Testors Nassau Blue Metallic over Krylon Aluminum. Then 3 coats of Krylon Clear Lacquer. Looks pretty good and will only need to rub out a little orange peel once it dries. Then I'll be ready for foil. Thanks for looking! Cool

If you cannot have a good time, what kinda time can you have? JR

Next on the bench:  Another 1970 Hemi 'Cuda, 1958 Chevy Impala, 1987 Buick GNX, 1950 Chevy Pick-up, Indy Reynard, 1965 Corvette, probably not in this order.

  • Member since
    November, 2003
  • From: East Bethel, Mn
Posted by midnightprowler on Thursday, July 12, 2018 3:29 AM

Looks great. To be honest, unless you are doing a contest car, I wouldn't worry about rubbing out the orange peel, 60's factory stock cars didn't have miles deep paint anyway lol.

1 Corinthians 15:51-54
1 Thessalonians 4:13-18

Ask me about Speedway Decals

  • Member since
    March, 2006
  • From: Spring, Tx
Posted by modelcarjr on Friday, July 20, 2018 3:26 PM

Thanks, Prowler! I agree with you. In fact, most of my paint jobs look like a lacquer paint job with a coat of wax. Unfortunately, most cars back in the day only looked like that for about a day and then it was back to the dull finish of the era. 

So I rubbed it out and because of the sharp edges had to give it a touch-up of both paint and clear and then rubbed it out a little more. Its pretty smooth but certainly not the two-part clearcoat that I see on a lot of models nowadays that look like Custom Show Cars not meant for the street and only driven off the trailer and into a show.

Houston Auto Modelers contest tomorrow but this one won't make it! Maybe next year!  

Here are three photos with BMF applied:

If you cannot have a good time, what kinda time can you have? JR

Next on the bench:  Another 1970 Hemi 'Cuda, 1958 Chevy Impala, 1987 Buick GNX, 1950 Chevy Pick-up, Indy Reynard, 1965 Corvette, probably not in this order.

  • Member since
    September, 2007
  • From: Melbourne, Fl.
Posted by rickr442 on Tuesday, July 24, 2018 1:53 AM

Great job, and the perfect color for a '67. Are you going to use the 'skunk stripes'?

This is the same kit that automotive artist Steve Stanford used as reference years ago when Chip Foose hired him to do the design of the re-imagined 'Eleanor' for the remake of 'Gone In Sixty Seconds'. He was having fits getting the shape of the rear of the roof correct 'til I brought him a kit body from my 'stash'.

Shoulda gotten pictures!

www.fueledbythefallen.com

'Peggy, call the insurance agent... The cars got some bullet holes!'..... Joe Mannix

Yeah, but half an inch to the right, he woulda missed me altogether!'.....Jim Rockford

  • Member since
    March, 2006
  • From: Spring, Tx
Posted by modelcarjr on Thursday, July 26, 2018 7:26 PM

Nice story Rick! Yes, I have applied the skunk stripes and here are a three pics. I had to cut wet decals in certain places, e.g., hood scoop, wipers, etc. The decals between the taillights didn't fit at all so I had to do a lot of cutting and then hit some bare spots with paint. just a few more decals, mirors and bumpers and this one will be done. Thanks for looking! Cool

 

If you cannot have a good time, what kinda time can you have? JR

Next on the bench:  Another 1970 Hemi 'Cuda, 1958 Chevy Impala, 1987 Buick GNX, 1950 Chevy Pick-up, Indy Reynard, 1965 Corvette, probably not in this order.

  • Member since
    March, 2006
  • From: Spring, Tx
Posted by modelcarjr on Sunday, July 29, 2018 12:15 PM

Its finished! A few outdoor pics! I left the inner fenders and firewall body color because the paint looked good and I didn't want to ruin it with a brush. However, I forgot to paint the water bag which I will finish now with a brush. 

If you cannot have a good time, what kinda time can you have? JR

Next on the bench:  Another 1970 Hemi 'Cuda, 1958 Chevy Impala, 1987 Buick GNX, 1950 Chevy Pick-up, Indy Reynard, 1965 Corvette, probably not in this order.

  • Member since
    March, 2006
  • From: Spring, Tx
Posted by modelcarjr on Sunday, July 29, 2018 12:26 PM

Having trouble posting pics. Maybe I'll get a few more later.

If you cannot have a good time, what kinda time can you have? JR

Next on the bench:  Another 1970 Hemi 'Cuda, 1958 Chevy Impala, 1987 Buick GNX, 1950 Chevy Pick-up, Indy Reynard, 1965 Corvette, probably not in this order.

  • Member since
    August, 2007
  • From: Kamloops,Canada
Posted by mclovin on Sunday, July 29, 2018 5:38 PM

You do some top notch work!!can't wait to see what you build next.

"to love it ,is to live it"

 http://public.fotki.com/convertible-fan/

 

  • Member since
    March, 2006
  • From: Spring, Tx
Posted by modelcarjr on Monday, July 30, 2018 5:53 AM

Thanks, McLovin! I appreciate your comment! Cool

If you cannot have a good time, what kinda time can you have? JR

Next on the bench:  Another 1970 Hemi 'Cuda, 1958 Chevy Impala, 1987 Buick GNX, 1950 Chevy Pick-up, Indy Reynard, 1965 Corvette, probably not in this order.

  • Member since
    February, 2008
Posted by justmike on Monday, July 30, 2018 11:11 AM

Nice job on the decals.  They really suit these Mustangs, don't they?  Your whole build is nice. As you paint that washer bag I bet your trying to figure out how you missed that, eh?  I don't know how many times I have looked at a finished kit and said " Hey, how did I .........?"

Feelings are like scents: The more they are analyzed, the worse they smell.
  • Member since
    December, 2003
  • From: Nova Scotia
Posted by Bainford on Tuesday, July 31, 2018 1:40 PM

Nice work on the Shelby. Those outdoor shots really look great.

Que the Vikings: "Spam Spam Spam Spam Spam Spam Spam Spam ..."

  • Member since
    March, 2006
  • From: Spring, Tx
Posted by modelcarjr on Tuesday, July 31, 2018 3:46 PM

Thanks, Mike and Bainford! I appreciate your comments! Yes, I forget to paint or detail some part on every build, it seems. But I have it painted now. I may try to find a Ford decal for it. Thanks for looking! Cool

If you cannot have a good time, what kinda time can you have? JR

Next on the bench:  Another 1970 Hemi 'Cuda, 1958 Chevy Impala, 1987 Buick GNX, 1950 Chevy Pick-up, Indy Reynard, 1965 Corvette, probably not in this order.

  • Member since
    December, 2003
  • From: Louisville, KY
Posted by jroc1989 on Friday, October 12, 2018 6:24 PM

WOW, what a beautiful build!!  LOVE that color choice!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS

FREE MONTHLY NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our privacy policy